轮毂防烧结剂
Anti-sintering Grease for Wheel hub
50ml
产品性能Product performance
本产品是由无机稠化剂稠化，添加纳米级铜粉末以及防锈剂精制而成。产品适用于高温、高负荷和腐蚀环境中的螺母、螺栓连接件的装配润滑，可承受重压及化学侵蚀，防止金属接触面因高温或长时间操作而造成的粘接和锈蚀，保护螺丝易于装配或松拆。可在高达1100℃的温度下发挥润滑和防止烧结卡死作用。适用于机动车轮毂钢圈接触面及螺丝防锈润滑剂。
1.极佳的高温防粘、防烧结性和螺纹密封性，高温不熔化；
2.优异的承压能力，摩擦系数与涂油螺栓相同，耐水淋性好；
3.优良的防锈、耐腐蚀、持久性，经反复拆卸、拧紧仍具有稳定的扭矩；
4.在长期高温或酸碱的恶劣条件下，防止部件卡死、腐蚀及表面擦伤。
英文
This product is finely made of inorganic thickener, copper powder in nano size，and rust inhibitor. It is used to lubricate adapting pieces such as nuts, bolts under environment such as high temperature and heavy load. It can stand high pressure and chemical erosion. It can prevent bonding and rusting between moving metal parts by high temperature or long time operation to make screws easy to be assembled or disintegrated. It can play a role of lubricant and anti-sintering at temperature as high as 1100℃. It can be used as lubricant for rim interface and screws.
1. Excellent anti-seizing, anti-sintering and sealability, and infusible under high temperature;
2. Outstanding pressure bearing capacity, with friction coefficient as small as oil coated screws, good water proof;
3. Exceptional anti-rusting, corrosion resisting, long lasting, a stable torque is kept even if being disintegrated and screwed home repeatedly;
4. Preventing parts from jamming, corroding and surface scratch under harsh environment such as long-term high temperature or acid or basic.
使用方法Usage
1. 使用前清除干净需要喷涂的部位；
2. 充分摇匀，把本产品均匀喷涂在需要的部位。
英文
1. Clean parts to be applied before use;
2. Shake evenly, and uniformly spray this product on needed parts.
注意事项：Cautions
严禁与其他油脂混合，使用和储存；
严禁直接喷涂在机动车制动盘与制动片接触面。
Should not mix, use or store with other grease;
Should not directly spray upon interface between brake disc and pads of vehicle.
