HCS125A-3产品技术说明书
一、 产品技术参数
产品型号 | HCS125A-3 |
起重力矩（kN.m） | 125 |
起重量 (kg) | 5000 |
吊臂伸缩节数 | 2 |
工作幅度 (m) | 8.7 |
起升高度(m) | 9.5(距起重机安装面) |
变幅角度(°) | 0～75 |
回转角度(°) | 360全回转 |
额定工作压力(MPa) | 17.5 |
额定流量(L/min) | 50 |
起重机自重(kg) | 2000 |
配装底盘 | 总质量12t~25t |
二、 产品配置
1. 三节吊臂，二节伸缩臂。
2. 单速液压绞车、涡轮蜗杆回转减速器。
3. 标配50齿轮泵。（默认左旋）
4. 全包方腔式支腿，大跨距5264mm。
5. 标配过卷报警装置。
6. 标配机械式自动收钩。
7. 推荐配置单腔伸缩式后支腿（另行购买，不在吊机中）
三、 产品优势
1. 吊臂采用Q690高强钢板、两块板拼焊，六边形截面，吊臂强度较一代产品大幅提升；
2. 吊臂工作幅度8.7m；
3. 吊臂伸缩采用单缸+拉锁形式，在20°以上仰角时,拉锁部分具有带三分之二额定载荷伸缩的能力；
4. 卷扬机构采用液压绞车，吊钩收放速度10m/min,噪音小、效率高、可靠性好。；
5. 支腿跨距5.26m，大于市场同行业产品，安装在14吨及以上底盘上时，不配后支腿即可满足稳定性要求；
6. 预留后支腿液压接口，可匹配后支腿安装，增加整车稳定性，提升起重性能。
7. 厂内万次可靠性试验远高于行业3000次标准，为客户提供安全、可靠、耐用的高性能产品。Product advantage
1. The boom is made of Q690 high-strength steel plate, two pieces of which are welded together. The hexagon section greatly improves the boom strength compared with the first-generation products.
2. The maximum working range of the boom is 8.7m;
3. The telescopic crane boom in the form of single cylinder + zip, when more than 20 ° Angle, zip part has the ability of two-thirds rated load with telescopic;
4. The hoisting machine adopts hydraulic winch, with the hoisting speed of 10m/min, low noise, high efficiency and good reliability. ;
5. The maximum span of the supporting leg is 5.26m, which is larger than that of the products in the same industry in the market.
6. Reserve the hydraulic interface of the rear supporting leg, which can be matched with the installation of the rear supporting leg to increase the stability of the whole vehicle and enhance the lifting performance.
7. The 10,000 reliability tests in the factory are far higher than the industry standard of 3,000 times, providing customers with safe, reliable and durable high-performance products.
