HCS200A-5产品技术说明书
一、 产品技术参数
产品型号 | HCS200A-5 | ||
起重力矩（kN.m） | 200 | ||
起重量 (kg) | |||
吊臂伸缩节
数 | 5 | ||
工作幅度 (m) | 18.7 | ||
起升高度(m) | 20(距起重机安装面) | ||
变幅角度(°) | 0～75 | ||
回转角度(°) | 360全回转 | ||
回转速度 | ≤2.5r/min | ||
额定工作压力(MPa) | 25 | ||
额定流量(L/min) | 63 | ||
起重机自重(kg) | 3650 | ||
配装底盘 | 总质量16t~31t |
二、 产品配置
1. 六节吊臂，五节伸缩臂；
2. 韩国进口三级伸缩油缸，机械式行程阀；
3. 单速液压绞车、行星式整体回转减速器；
4. 标配63排量左旋柱塞泵；
5. 全包方腔式支腿，大跨距5600mm；
6. 标配吊臂照明灯；
7. 标配备上操作座椅，视野更开阔；
8. 标配过卷报警，选装力限器时，过卷自动卸荷，未装力限器时，为过卷声音报警；
9. 吊臂和变幅采用进口平衡阀；
10. 选装温控开关，根据环境温度控制启停作业；
11. 选装绞车防过放装置，更安全可靠；
12. 选配力矩限制器，超载卸荷，工作更安全；
13. 可选装手动比例阀；
14. 推荐配置单腔伸缩式后支腿（另行购买，不在吊机中）。
说明：1~9为标准配置，10~12项在针对俄罗斯出口时为标配，其他区域需选装，13为选装件，14为推荐配置。
三、 产品优势
1. 结构件采用690MPa高强度钢板焊接，强度高、韧性好、自重轻。
2. 采用先进的三维设计及应力分析，确保产品的可靠性。
3. 回转机构采用行星传动机构，保证操作和行车安全。
4. 卷扬机构采用成熟液压绞车结构噪音小、效率高、可靠性好。
5. 吊臂伸缩采用三级油缸+索具伸缩形式，带载伸缩能力国内领先，油缸部
分100%，索具部分2/3。
6. 工作幅度大，适用范围广。
7. 产品配上车座椅操纵，操作视野更好，作业更安全。
23. 吊臂伸缩采用三级油缸+索具伸缩形式，带载伸缩能力国内领先，油缸部Hcs200a-5 product technical specificationXii. Product technical parameters
Product model hcs200a-5
Maximum lifting moment (kn.m) 200
Maximum lifting weight (kg) 8000
Boom telescopic joint number 5
Maximum working range (m) 18.7
Maximum lifting height (m) 20(from the mounting surface of the crane)
Amplitude Angle (°) 0 ~ 75
Rotation Angle (°) 360 full rotation
Rotary speed ≤2.5r/min
Rated working pressure (MPa) 25
Rated flow rate (L/min) 63
Crane dead weight (kg) 3650
The total weight of the assembled chassis is 16t~31t
Xiii. Product configuration
34. Six booms, five telescopic booms;
35. Three-stage telescopic oil cylinder imported from South Korea, mechanical stroke valve;
36. Single speed hydraulic winch, planetary integral rotary reducer;
37. Standard 63-displacement left-rotor plunger pump;
38. Fully enclosed square chamber strut, large span 5600mm;
39. Standard boom lighting;
40. Equipped with upper operating seat, the view is wider;
41. Standard over-coil alarm, automatic unloading of over-coil when load limiter is selected, and sound alarm for over-coil when no load limiter is installed;
42. Import balance valve is adopted for boom and luffing;
43. Select temperature control switch to start and stop operation according to the environment temperature;
44. Optional installation of winch overrelease device, more safe and reliable;
45. Equipped with torque limiter, overload unloading, safer work;
46. Optional manual proportional valve;
47. Single chamber telescopic rear leg is recommended (purchased separately, not in the crane).
Note: items 1-9 are standard configuration, items 10-12 are standard configuration for Russian export, other regions need optional assembly, 13 is optional assembly, 14 is recommended configuration.
Xiv. Product advantages
19. The structure is welded with 690MPa high-strength steel plate with high strength, good toughness and light dead weight.
20. Adopt advanced 3d design and stress analysis to ensure product reliability.
21. The rotary mechanism adopts planetary transmission mechanism to ensure safe operation and driving.
The winch adopts mature hydraulic winch structure with low noise, high efficiency and good reliability.
23. Boom telescopic adopts three-level cylinder + rigging telescopic form, leading in China in carrying telescopic capacity, cylinder section
100%, 2/3 rigging.
24. Wide range of work and wide range of application.
25. The product is equipped with seat control, with better operation vision and safer operation.
