SEBS美国科腾 Kraton D1102 (SBS)
Kraton® D1102 (SBS) Linear Block Copolymer
Elastomer, TPE
Kraton
产品说明:
(SBS) styrene-butadiene-styrene block polymer. KRATON® Polymers require no premastication or vulcanization. They can be blended with thermoplastic polymers and significantly improve the impact qualities of the material, both at room and low temperature. This KRATON polymer meets FDA regulations as articles or as ingredients in articles intended for food contact. FDA clearances vary from one grade to another. For specific clearances, letters of certification will be provided on request.
Applications: modified asphalts, thermoplastic and thermoset polymer modification, adhesives, sealants, coatings, sporting goods, film, and general elastomer compounding.
Information provided by the manufacturer, Kraton® Polymers.
物性信息:
物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|
比重 | 0.940 g/cc | 0.940 g/cc | |
布氏粘度 | 1200 cP @Temperature 25.0 °C | 1200 cP @Temperature 77.0 °F | Toluene solution. Neat polymer concentration, 25%w. |
熔体流动速率 | 11 g/10 min | 11 g/10 min | |
机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|
肖氏硬度 (邵氏 A) | 66 | 66 | 10 seconds. Typical values on polymer compression molded at 150°C (300°F). |
极限抗拉强度 | 31.72 MPa | 4601 psi | Tensile tester jaw separation 10 in/min (25.4 cm/min). Typical properties based on film cast from toluene solution.; ASTM D412 |
伸长率 (断裂) | 880 % | 880 % | Tensile tester jaw separation 10 in/min (25.4 cm/min); ASTM D412 |
300%模量 | 0.00276 GPa | 0.400 ksi | |
电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|
电阻率 | 1.00e+14 - 1.00e+16 ohm-cm | 1.00e+14 - 1.00e+16 ohm-cm | |
介电强度 | 11.81 - 39.37 kV/mm | 300.0 - 1000 kV/in | |
热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|
玻璃化转变温度,Tg | -80.0 °C | -112 °F | |
加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|
加工温度 | 150 - 200 °C | 302 - 392 °F |