产品型号: LC-JB名 称:烤杯机第二代电 压:110v 220V 功 率:350W温度范围:0-399℃时间控制:0-999ses工作台尺寸:63 75 81 cm包装 尺寸:34*34*24 34*32*28 64*44*22 cm重 量:9kg 10kg 11kg 产品用途:
本机可将任何彩色色标、人像照片、风景图案等烤制在瓷杯上,特别适合用作广告、礼品、宣传活动等,同时也可作为个性化物品,兼艺术欣赏和实用性于一体。产品特点;
●全数字化显示,时间准确度高;
●PID微电脑控制,无须放置定型杯,直接升温;
●耐高温加厚硅胶垫使烤印压力更加均匀,400℃不变形;
●可实现整个杯体的全幅转印;
●可连续工作12小时。操作流程:
启动电源开关,电源指示灯指示;
合上压力手柄(调整压力适中);
将温控器调至所需温度(通常180℃),升温时间约1分钟,温度达到设定值时,机器将自动进入恒温状态;
将定时器调至所需时间(通常15秒-20秒);
将裹有图片的瓷杯放于杯机中(为防止瓷杯表面被烤焦和出现压痕,包裹瓷杯的图像页寸一定要足够覆盖包裹住瓷杯表面),合上压力手柄,温控器的数值会自动下降,,需让杯机再一次的升温(通常180℃约1-2分钟),手按左侧的绿色按钮,待时间到达时警报提示,同样按绿色按钮,取出瓷杯(为防止油墨扩 散,请先冷却1分钟左右再取出杯子至冷水中浸泡冷却),擦干即可。
维护事项:
1.压力:调节压力手柄上的顶杆;
2.温度:温控器通常设定为180℃;
3。时间:定时器通通常设定为0-30秒;
4.如出现质量问题,请及时与本公司联系。Name: Second Generation Mug Press Model:LC-JB LC-JBparameter:Voltage:110v 220v power:350wTemperature range:0-399℃Time range:0-999secWork table size:63 75 81(cm)Casing size:34*34*24 34*34*28 64*44*22 (cm)Avoirdupois:9kg 10kg 11kg Use:
The machine can print any color mark, photos or pictures on the ceramic mugs. It is particularly suitable for advertising, gifts, promotional activities and so onCharacteristic ;
full digital show .high accuracy for time
2 PID Micro-computer controller ,no need to place fixity cup, temperature rises directly
3.use bear high temperature froth silica gel pad enable pressure more even, can bear 400 ℃ and doesn’t distortion.
4.all the surface of the mug can be transfer printed on
5.can be continuous working for 12 hoursOperation:
1.Plug the power and turn on the general switch and the indication light bright.
2.close the pressure handle ( adjust suitable pressure )
3.Adjust the temperature regulator to suitable temperature generally is180 centigrade, and the warming time is about 1 minutes; .when temperature reaches the set point, the machine will turn into a constant temperature automatically.
4.Adjust timer button to a suitable time, generally is 15-20 sec.
5.Put the porcelain mug which wrapped by pictures into the machine, (in order to protect the mug from burning down, the size of the pictures must be big enough to wrap the surface of the mug), then close the pressure handle.. the temperature will drop automatic, need to rise up the temperature again ( generally is 180℃ about 1-2 sec) . press the left green button, The buzzer will sound when time is up ,at this time press green button and take the mug out and wipe from the water.
( in order to prevent printing ink pervasion , please wait 1 min to let the machine cooling then take out the mug to the cold water )Maintenance:1. pressure: adjust the top pole of the pressure handle
2. temperature: the controller usually set in 180℃
3.