开关电源S-15系列
低电压、高可靠 Low price and high reliability
105℃输出电容器 105℃ output capacitor
全球适用AC输入电源 AC input power suitable for the world
效率高、工作温度低 High efficiency and low operation temperature
软启动电流、有效降低AC输入冲击 Soft-start current can reduce the AC input impact efficiency
有短路保护、过载保护 With short-circuit and overload protection
体积小、重量轻 Compact size, light weight
100﹪满负荷烧机测试 100﹪full-load burn-in test
内装EMI滤波器、纹波极小 Installed with EMI filter, minimum wave
型号 Mode
性能 Performance | S-15-5 | S-15-12 | S-15-24 |
直流输出电压 DC output voltage | 5V | 12V | 24V |
输出电压公差 Output voltage tolerance | ±2﹪ | ±1﹪ | ±1﹪ |
额定输出电流 Rated output current | 3A | 1.3A | 0.7A |
输出电流范围 Output current range | 0-3A | 0-1.3A | 0-0.7A |
纹波及噪音 Ripple and noise | 100mVp-p | 50mVp-p | 50mVp-p |
进线稳定度 Inlet stability | ±0.5﹪ | ±0.5﹪ | ±0.5﹪ |
负载稳定度 Load stability | ±1﹪ | ±0.2﹪ | ±0.5﹪ |
直流输出功率 DC output power | 15W | 15.6W | 16.8W |
效率 Efficiency | 70﹪ | 74﹪ | 79﹪ |
直流电压可调范围 Adjustable range for DC voltage | +10,-5﹪ | ±10﹪ | ±10﹪ |
输入电压范围 AC input voltage range | 85～132VAC/170～264VAC由开关选择47～63Hz; 240～370VDC 85～132VAC/170～264VAC selected by switch 47～63Hz; 240～370VDC | ||
输入电流 Input current | 0.5A/115V 0.25A/230V | ||
冲击电流 AC dash current | 冷启动电流 15A/115V 30A/230V Cold-start current 15A/115V 30A/230V | ||
漏电流 Leakage current | ＜0.55mA/240VAC | ||
过载保护 Overload protection | 105﹪～150﹪类型：电流限制 复位：自动恢复 105﹪～150﹪ Type: pulsing hiccup shutdown reset: auto recovery | ||
过电压保护 Over-voltage protection | ……………… | ||
高温保护 High-temperature protection | …………………. | ||
温度系数 Temperature coefficient | ±0.02﹪/℃(0～50℃) | ||
启动、上升、保持时间 Startup .rise .retention time | 200ms 100ms 30ms | ||
抗震性 Vibration | 10～500Hz, 2G 10min/1周期，时长60分钟，各轴 10～500Hz, 2G 10min/1 cycle , Period for 60 min , Each axes | ||
耐压性 With standard voltage | 输入输出间：1.5KvAC输入与外壳： 1.5KvAC输出外壳： 0.5KvAC Input and output internal ：1.5KvAC input and enclosure ： 1.5KvAC output and enclosure： 0.5KvAC | ||
隔离电阻 Isolation resistance | 输入输出间： 输入与外壳，输出与外壳：500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ | ||
工作温度、湿度 Working temperature and humidity | -10℃～+60℃(参考输出特性图)，20﹪～90﹪RH -10℃～+60℃(Refer to output diagram cech，20﹪～90﹪RH | ||
存储温度、湿度 Store temperature and humidity | -20℃～+85℃, 10%～95%RH | ||
外型尺寸 Overall dimension | 99×97×35mm | ||
重量 Weight | 0.3kgs | ||
安全标准 Safety standards | 满足UL1012要求（不申请标记） Meet UL 1012 requirement( not apply for the mark) | ||
EMC标准 EMC standards | 满足FCC部分15J条件等级B Meet FCC PART 15J condition class B | ||
备注： 1.以上参数测试条件为：230VAC输入，额定负载,25℃ 70%Rh,温度。 2．容差： 包括设定容差，线路稳定度，负载稳定度 3．纹波测试：20MHz用“A12”双绞线，中断用0.1uF&47uF电容器短路。 4．进线电压稳定度测试：满负载时进线最低电压到最高电压。 5．负载稳定度测试：负载从0%到100% Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load, 25℃ 70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. Wave test: adopt “A12” double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to100% | |||
