开关电源D-30系列
低电压、高可靠 Low price and high reliability
105℃输出电容器 105℃ output capacitor
全球适用AC输入电源 AC input power suitable for the world
效率高、工作温度低 High efficiency and low operation temperature
软启动电流、有效降低AC输入冲击 Soft-start current can reduce the AC input impact efficiency
有短路保护、过载保护 With short-circuit and overload protection
体积小、重量轻 Compact size, light weight
100﹪满负荷烧机测试 100﹪full-load burn-in test
内装EMI滤波器、纹波极小 Installed with EMI filter, minimum wave
型号 Mode
性能 Performance | D-30A | D-30B | ||
CH1 | CH2 | CH1 | CH2 | |
直流输出电压 DC output voltage | 5V | 12V | 5V | 24V |
输出电压公差 Output voltage tolerance | ±2﹪ | ±3﹪, | ±2﹪ | ±3﹪ |
额定输出电流 Rated output current | 4A | 1A | 2.2A | 1A |
输出电流范围 Output current range | 1--4A | 0.1-- 1A | 1—2.2A | 0-1.1A |
纹波及噪音 Ripple and noise | 50mVp-p | 100mVp-p | 50mVp-p | 100mVp-p |
进线稳定度 Inlet stability | ±0.5﹪ | ±1﹪ | ±0.5﹪ | ±1﹪ |
负载稳定度 Load stability | ±0.5﹪ | ±4﹪ | ±0.5﹪ | ±4﹪ |
直流输出功率 DC output power | 32W | 35W | ||
效率 Efficiency | 72% | 74% | ||
直流电压可调范围 Adjustable range for DC voltage | CH1; +10,-5% | CH1; +10,-5% | ||
输入电压范围 AC input voltage range | 85～132VAC/170～264VAC由开关选择47～63Hz; 240～370VDC 85～132VAC/170～264VAC selected by switch 47～63Hz; 240～370VDC | |||
输入电流 Input current | 0.8A/115V 0.45A/230V | |||
冲击电流 AC dash current | 冷启动电流 18A/115V 36A/230V Cold-start current 18A/115V 36A/230V | |||
漏电流 Leakage current | ＜0.5mA/240VAC | |||
过载保护 Overload protection | 105﹪～150﹪类型：电流限制 复位：自动恢复 105﹪～150﹪ Type: pulsing hiccup shutdown reset: auto recovery | |||
过电压保护 Over-voltage protection | ………………… | |||
高温保护 High-temperature protection | …………………. | |||
温度系数 Temperature coefficient | ±0.03﹪/℃(0～50℃)ON+5V | |||
启动、上升、保持时间 Startup .rise .retention time | 200ms 100ms 30ms/115V 300ms | |||
抗震性 Vibration | 10～500Hz, 2G 10min/1周期，时长60分钟，各轴 10～500Hz, 2G 10min/1 cycle , Period for 60 min , Each axes | |||
耐压性 With standard voltage | 输入输出间：1.5KvAC输入与外壳： 1.5KvAC输出外壳： 0.5KvAC Input and output internal ：1.5KvAC input and enclosure ： 1.5KvAC output and enclosure： 0.5KvAC | |||
隔离电阻 Isolation resistance | 输入输出间： 输入与外壳，输出与外壳：500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ | |||
工作温度、湿度 Working temperature and humidity | -10℃～+60℃(参考输出特性图)，20﹪～90﹪RH -10℃～+60℃(Refer to output diagram cech，20﹪～90﹪RH | |||
存储温度、湿度 Store temperature and humidity | -20℃～+85℃, 10%～95%RH | |||
外型尺寸 Overall dimension | 129×98×38mm | |||
重量 Weight | 0.4kgs | |||
安全标准 Safety standards | 满足UL1012要求（不申请标记） Meet UL 1012 requirement( not apply for the mark) | |||
EMC标准 EMC standards | 满足FCC部分15J条件等级B Meet FCC PART 15J condition class B | |||
备注： 1.以上参数测试条件为：230VAC输入，额定负载,25℃ 70%Rh,温度。 2．容差： 包括设定容差，线路稳定度，负载稳定度 3．纹波测试：20MHz用“A12”双绞线，中断用0.1uF&47uF电容器短路。 4．进线电压稳定度测试：满负载时进线最低电压到最高电压。 5．负载稳定度测试：负载从0%到100% Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load, 25℃ 70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. Wave test: adopt “A12” double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to100% | ||||
