开关电源S-120系列
低价格、高可靠 Low price and high reliability
105℃输出电容器 105℃ output capacitor
全球适用AC输入电源 AC input power suitable for the world
效率高、工作温度低 High efficiency and low operation temperature
软启动电流、有效降低AC输入冲击 Soft-start current can reduce the AC input impact efficiency
有短路保护、过载保护 With short-circuit and overload protection
体积小、重量轻 Compact size, light weight
100﹪满负荷烧机测试 100﹪full-load burn-in test
内装EMI滤波器、纹波极小 Installed with EMI filter, minimum wave
|
型号 Mode
性能 Performance |
S-120-5 |
S-120-7.5 |
S-120-12 |
S-120-15 |
S-120-24 |
S-120-48 |
|
直流输出电压 DC output voltage |
5V |
7.5V |
12V |
15V |
24V |
48V |
|
输出电压公差 Output voltage tolerance |
±2﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
|
额定输出电流 Rated output current |
24A |
16A |
10A |
8A |
5A |
2.5A |
|
输出电流范围 Output current range |
0～24A |
0～16A |
0～10A |
0～8A |
0～5A |
0～2.5A |
|
纹波及噪音 Ripple and noise |
75mVp-p |
100mVp-p |
60mVp-p |
60mVp-p |
60mVp-p |
50mVp-p |
|
进线稳定度 Inlet stability |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
|
负载稳定度 Load stability |
±1﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
|
直流输出功率 DC output power |
120W |
120W |
120W |
120W |
120W |
120W |
|
效率 Efficiency |
76﹪ |
78﹪ |
80﹪ |
81﹪ |
83﹪ |
84﹪ |
|
直流电压可调范围 Adjustable range for DC voltage |
±10% |
±10% |
±10% |
±10% |
±10% |
±10% |
|
输入电压范围 AC input voltage range |
85～132VAC/170～264VAC由开关选择47～63Hz; 240～370VDC 85～132VAC/170～264VAC selected by switch 47～63Hz; 240～370VDC | |||||
|
输入电流 Input current |
0.8A/115V 0.45A/230V | |||||
|
冲击电流 AC dash current |
冷启动电流 30A/115V 60A/230V Cold-start current 30A/115V 60A/230V | |||||
|
漏电流 Leakage current |
＜1mA/240VAC | |||||
|
过载保护 Overload protection |
105﹪～150﹪类型：电流限制 复位：自动恢复 105﹪～150﹪ Type: pulsing hiccup shutdown reset: auto recovery | |||||
|
过电压保护 Over-voltage protection |
………………… | |||||
|
高温保护 High-temperature protection |
…………………. | |||||
|
温度系数 Temperature coefficient |
±0.03﹪/℃(0～50℃) | |||||
|
启动、上升、保持时间 Startup .rise .retention time |
200ms 100ms 30ms | |||||
|
抗震性 Vibration |
10～500Hz, 2G 10min/1周期，时长60分钟，各轴 10～500Hz, 2G 10min/1 cycle , Period for 60 min , Each axes | |||||
|
耐压性 With standard voltage |
输入输出间：1.5KvAC输入与外壳： 1.5KvAC输出外壳： 0.5KvAC Input and output internal ：1.5KvAC input and enclosure ： 1.5KvAC output and enclosure： 0.5KvAC | |||||
|
隔离电阻 Isolation resistance |
输入输出间： 输入与外壳，输出与外壳：500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ | |||||
|
工作温度、湿度 Working temperature and humidity |
-10℃～+60℃(参考输出特性图)，20﹪～90﹪RH -10℃～+60℃(Refer to output diagram cech，20﹪～90﹪RH | |||||
|
存储温度、湿度 Store temperature and humidity |
-20℃～+85℃, 10%～95%RH | |||||
|
外型尺寸 Overall dimension |
199×98×38mm | |||||
|
重量 Weight |
0.65kgs | |||||
|
安全标准 Safety standards |
UL1012 TUV按6050（IEC,UL1950）认证 UL 1012 TUV EN6050(IEC,UL1950) Approved | |||||
|
EMC标准 EMC standards |
CISPR22(按55022)，IEC801-2,3,4IEC555 -2认证 CISPR22(EN55022)，IEC801-2,3,4IEC555 -2 Verification | |||||
|
备注： 1.以上参数测试条件为：230VAC输入，额定负载,25℃ 70%Rh,温度。 2．容差： 包括设定容差，线路稳定度，负载稳定度 3．纹波测试：20MHz用“A12”双绞线，中断用0.1uF&47uF电容器短路。 4．进线电压稳定度测试：满负载时进线最低电压到最高电压。 5．负载稳定度测试：负载从0%到100% Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load, 25℃ 70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. Wave test: adopt “A12” double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to100% | ||||||
