开关电源S-250系列
低价格、高可靠 Low price and high reliability
105℃输出电容器 105℃ output capacitor
全球适用AC输入电源 AC input power suitable for the world
效率高、工作温度低 High efficiency and low operation temperature
软启动电流、有效降低AC输入冲击 Soft-start current can reduce the AC input impact efficiency
有短路保护、过载保护 With short-circuit and overload protection
体积小、重量轻 Compact size, light weight
100﹪满负荷烧机测试 100﹪full-load burn-in test
内装EMI滤波器、纹波极小 Installed with EMI filter, minimum wave
型号 Mode
性能 Performance |
S-250-5 |
S-250-7.5 |
S-250-12 |
S-250-13.5 |
S-250-15 |
S-250-24 |
S-250-27 |
S-250-48 |
直流输出电压 DC output voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
输出电压容差 Output voltage tolerance |
±2﹪ |
±2﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
±1﹪ |
额定输出电流 Rated output current |
45A |
33A |
20A |
18A |
16.5A |
10A |
9A |
5A |
输出电流范围 Output current range |
0~45A |
0~33A |
0~20A |
0~18A |
0~16.5A |
0~10A |
0~9A |
0~5A |
纹波及噪音 Ripple and noise |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
100mVp-p |
100mVp-p |
进线稳定度 Inlet stability |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
负载稳定度 Load stability |
±1﹪ |
±1﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
±0.5﹪ |
直流输出功率 DC output power |
225W |
240W |
240W |
240W |
240W |
240W |
240W |
240W |
效率 Efficiency |
74﹪ |
79﹪ |
83﹪ |
83﹪ |
84﹪ |
85﹪ |
85﹪ |
86﹪ |
直流电压可调范围 Adjustable range for DC voltage |
4.5-5.6V |
6-9V |
10-13.2V |
12-15V |
13.5-18V |
20-26.4V |
26-32V |
41-56V |
输入电压范围 AC input voltage range |
90~132VAC/180~264VAC由开关选择47~63Hz; 254~370VDC | |||||||
输入电流 Input current |
3.6A/115V 1.8A/230V | |||||||
冲击电流 AC dash current |
25A/115V 50A/230V | |||||||
漏电流 Leakage current |
<3.5mA/240VAC | |||||||
过载保护 Overload protection |
105﹪~150﹪类型:切断输出 复位:自动恢复 105﹪~150﹪ Type: pulsing hiccup shutdown reset: auto recovery | |||||||
过电压保护 Over-voltage protection |
115%~135% | |||||||
高温保护 High-temperature protection |
…………………. | |||||||
温度系数 Temperature coefficient |
±0.03﹪/℃(0~50℃) | |||||||
启动、上升、保持时间 Startup .rise .retention time |
200ms, 100ms, 20ms | |||||||
抗震性 Vibration |
10~500Hz, 2G 10min/1周期,时长60分钟,各轴 10~500Hz, 2G 10min/1 cycle , Period for 60 min , Each axes | |||||||
耐压性 With standard voltage |
输入输出间:1.5KvAC输入与外壳: 1.5KvAC输出与外壳: 0.5KvAC Input and output internal :1.5KvAC input and enclosure : 1.5KvAC output and enclosure: 0.5KvAC | |||||||
隔离电阻 Isolation resistance |
输入输出间: 输入与外壳,输出与外壳:500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ | |||||||
工作温度、湿度 Working temperature and humidity |
-10℃~+60℃(参考输出特性图),20﹪~90﹪RH -10℃~+60℃(Refer to output derating curve,20﹪~90﹪RH | |||||||
存储温度、湿度 Store temperature and humidity |
-20℃~+85℃, 10%~95%RH | |||||||
外型尺寸 Overall dimension |
199×110×50mm | |||||||
重量 Weight |
0.9kgs | |||||||
安全标准 Safety standards |
设计交付UL1950 Design refer to UL 1950 | |||||||
EMC标准 EMC standards |
设计表示FCC部分15J条件 等级A Design refer to FCC Part15J class A | |||||||
备注: 1.以上参数测试条件为:230VAC输入,额定负载,25℃ 70%Rh,温度。 2.容差: 包括设定容差,线路稳定度,负载稳定度。 3.纹波测试:20MHz用“A12”双绞线,中断用0.1uF&47uF电容器短路。 4.进线电压稳定度测试:满负载时进线最低电压到最高电压。 5.负载稳定度测试:负载从0%到100%。 6.C3、4、32必须拆除。 Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load, 25℃ 70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. Wave test: adopt “A12” double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to100% 6.C3、4、32 must be knocked down. |