厂家直销YO(KBOD)双速型控制与保护开关
以CPS(KB0)作为主开关，与接触器、电气联锁等附件组合，构成双速电动机控制器CPSD(KB0D)，适用于双速电动机的控制与保护。
双速电动机控制器配置有三种：
◇配置一：高速为消防型(过载、过流只报警不跳闸)，低速为基本型；
◇配置二：高、低速均为基本型；
◇配置三：高、低速均为消防型(应注明特殊定货)。
CPSD3(KBOD3)三速型控制与保护开关
以CPS(KB0)作为主开关，与接触器、电气联锁等附件组合，构成三速电动机控制器CPSD3（KB0D3)，适用于三速电动机的控制与保护。
主电路参数及附件模块同基本型
------------------------------------------------------------------------------------------------------------------------------------------------------
与塑壳断路器相比：
a. 具有分断能力高、飞弧距离短的特性
CPS(KB0)在380V额定运行短路分断能力Ics (o－co-co) 达到高分断型为80kA、标准型为50kA、经济型为35kA, 在50kA 预期短路电流下的分断时间仅为2～3ms, 限流系数达到0.2以下，达到塑壳断路器的领先水平，达到熔断器的限流水平，大大限制了短路电流对系统的动、热冲击。CPS(IKBO)飞弧距离仅为20～30mm。
b. 与塑壳断路器构成的保护系统相比，具有保护整定电流均可调整的特性
CPS(KBO)的电流均可在面板上进行调整，即除了常规的保护电流可根据负载功率进行整定外，过流保护整定电流在调整电流数值时同时进行调整(配电负载的调整范围为3～6Ie，电动机负载的调整范围为6～14Ie)。克服了塑壳断路器的短路保护整定电流出厂后用户无法调整的缺点，使得CPS(KB0)产品即使安装在线路末端，短路电流较小时，同样具有很好的短路保护功能。
与接触器性能相比具有寿命长、操作方便的特性
手动操作，又可实现远距离自动控制功能。采用了先进的触头与电磁系统分离式设计，有效抑制了触头的二次弹跳，大大提高了产品的电寿命，而且特别适用于重载起动等严酷的场合。
产品优势：www.yoybdq.com
与分离电器构成的系统相比
a. 具有控制与保护自配合的特性
CPS(KB0)系列控制与保护开关电器集控制与保护功能于一体,相当于断路器(熔断器)＋接触器＋过载继电器＋辅助电器。很好的解决了分离元件不能或很难解决的元件之间的保护与控制特性匹配问题，使保护与控制特性配合更完善合理( 具有反时限、定时限和瞬时三段保护特性)，只要根据负载功率或电流即可正确选择单一产品,代替以往的包括自电源进线端至负载端的各种电器，不需降容；大大减轻了设计人 员的工作量。
b. 具有无可比拟的运行可靠性和系统的连续运行性能
CPS(KB0) 在分断短路电流后无需维护即可投入使用，即具有分断短路故障后的连续运行性能：CPS(IKB0) 在进行了分断短路电流试验后，仍具有不小于1500次的AC-44电寿命，这是由断路器等分离元件构成的系统所难以达到的，CPS(IKB0)的这一特性极大地提高了系统的运行可靠性和系统的连续运行性，其中的Ics为80kA指标属同类产品的国际领先、国内最高指标。
c. 节能节材
CPS(KB0)具有体积小、安装面积少、无分离元件接点、减少线路发热、节约能源、节约材料等优点。
联系人：徐先生
手机：18368771770
地址：浙江乐清市柳市潭头工业区
CPSD (KBOD) dual speed control and protective switching www.shyosdy.com
The CPS (KB0) as the main switch, contactor, and electrical interlock accessories, constitute the double speed motor controller CPSD (KB0D), control and protection for double speed motor.
Double speed motor controller is configured with three:
◇ configuration: high speed as the fire type (overload, overcurrent trip alarm not only), low speed as the basic type;
◇ configuration two: high, low speed are basic type;
◇ configuration three: high, low speed are fire type (should be marked with special orders).
CPSD3 (KBOD3) three speed type control and protection switch
The CPS (KB0) as the main switch, contactor, and electrical interlock accessories, constitute the three speed motor controller CPSD3 (KB0D3), control and protection for three speed motor.
The main circuit parameters and accessory module with the basic type
------------------------------------------------------------------------------------------------------------------------------------------------------
Compared with the moulded case circuit breaker:
A. has the characteristics of high breaking capacity, arcing distance is short
CPS (KB0) in 380V rated service short-circuit breaking capacity of Ics (o Co-Co) to achieve high breaking type 80kA, type 50kA, standard economic type is 35kA, 50kA is expected in the short circuit current under the breaking time is only 2 ~ 3MS, current limiting factor is less than 0.2, leading to the moulded case circuit breaker, to fuse the limiting level, greatly limiting the short-circuit current of system dynamic, thermal shock. CPS (IKBO) arcing distance is only 20 ~ 30mm.www.shyohz.com
Compared with the protection system of B. and moulded case circuit breaker which has protective properties, setting current can be adjusted
CPS (KBO) of the current can be adjusted in the panel, which in addition to the protection current conventional according to load power setting, over current protection setting current and adjusted in the adjusted current value (distribution load adjustment range is 3 ~ 6Ie, the motor load adjustment range is 6 ~ 14Ie). To overcome the short circuit breaker protection setting current factory after the user can not adjust the shortcomings, such that CPS (KB0) products even installed at the end of the line, is small short circuit current, also has the short circuit protection function is very good.www.kawa10.com
Compared with the contactor performance has the characteristics of long service life, convenient operation
Manual operation, and can realize remote control function. The contact and electromagnetic system advanced separation type design, effectively inhibit the two spring contacts, greatly improving the electrical life of the product, and is especially suitable for heavy load starting and other harsh occasions.
Product advantage:www.shrmyb.com
Compared with the system structure and separation apparatus
A. has the characteristics of control and protection from the
CPS (KB0) series of control and protective switching control and protection functions in one, the equivalent circuit breaker (fuse) + + + auxiliary electrical overload relay contactor. The matching problem between protection and control characteristics of a good solution to the separation element cannot or difficult to solve element, the protection and control characteristics with more perfect and reasonable (with anti time limit, time limit and instantaneous three section protection characteristics), as long as the load to the power or current correct selection of a single product, instead of including all electric self power into the line end to end, without derating; greatly reduces the workload of design personnel.www.shrmhz.com
Continuous operation performance of B. with reliability and system There is nothing comparable to this
