W11H-三辊弧线下调式卷板机技术参数3-Roller Hydr.Bending Machine
1、 意大利技术。
2、 上辊固定,两下辊围绕奥一固定回转中心做弧线升降运动,两下辊可单独升降货同升同降。
3、 板材一次上料不需要掉头即可完成预弯和卷制校园等工序。
4、 三个工作辊均为主驱动辊,保证对任何厚度的材料有良好的送进聚卷制功能。
5、 由于三个棍子位置可以靠的很近,能够实现小筒径卷制和校圆。
特点:
1、 操作方便,卷制方法多样化。
2、 动作简单(水平和垂直移动的合成运动,弧线生敬爱那个的运动轨迹),故障少。
3、 板材卷制过程中,始终处于夹紧状态,不致滑动跑偏。
4、 三个工作辊,辊径相同。
5、 工作辊在任意状态下松开间隙即可取出工作,无需大道上顶点位置。
6、 微机控制,同步精度±0.2m。
1.
Italy technology.
2.
Upper-roll fixed,the two rollers under a fixed turn around the center arc movement take-off and landing.
3.
On a plate material does not need to complete U-turn and pre-bending roll-round school,and other processes.
4.
Rollers are mainly the work of the three-driven roller to ensure that any thickness of the material sent to a good rolling function.
5.
Due to the location of the three roller can rely on the close,to achieve a small diameter tube and rolling round the school.
Characteristics
1.
Easy to operate,rolling ways to persify
2.
Simple movement (horizontal and vertical movement of synthetic campaign to lift the arc trajectory),a small fault.
3.
Plate rolling process,always in a state of clamping,the deviation will not slide.
4.
The work of the three-roll,roll the same track.
5.
Rollers work in any state to release the space work out ,no need to reach the top position.
6.
Microcomputer control,synchronization accur of±0.2mm.