（1）六爪浮动球臂锁紧卡盘的标准特征
Counter Centrifugal for higher rotational speeds
离心力补偿-转速更高
12 points of equalized grip force
12 点均衡夹紧
“Pull-Back” feature
六爪浮动球臂锁紧卡盘的后拉特征
Single screw jaw mount
卡爪安装仅需要一个锁紧螺栓
Increased sensitivity through reduce power ratio’s
通过降低拉力比例可增加夹紧力的敏感度
Built-In safety stops
内置安全挡块
Internal / External chucking
内径/外径夹紧
Capable of High/Low chucking force “ON THE FLY”
高速旋转的情况下，大夹紧力和小夹紧力都可适用
Maximum chip flow
超大铁屑排屑空间
（2）六爪浮动球臂锁紧卡盘的具体应用
The “ECC” Ball-Lok in general is a 1st operation chuck.
ECC 通常情况下是用于第一道序加工
Machining parts from castings, forgings, etc.
适合于铸件、锻件等工件
Chucking thin wall, out-of-round, parts where distortion is a concern
适合于薄壁件、非正圆件（防止变形方面考虑）
Heavy machining operations
应用于重切削
Rigid clamping required
刚性夹紧要求
Higher rotational speeds
高转速要求
Centralizing Chuck
自动定心
Review the customer’s accuracy requirements
根据客户图纸精度要求而定
Compensating Chuck
自动补偿
Collet arbor or Center mounted to chuck face
涨套或者中心顶尖安装在卡盘中心
Collet or Center centralizes the part
涨套或者中心顶尖定心工件
ECC jaws compensate and drive during the machining
ECC卡爪浮动和驱动工件旋转
N.A. Woodworth utilizes collets, diaphragms, OPN, etc. for 2nd operation
销售工程师：Jack Chen
电子邮件: sales#bosschuck。Com（#替换成@）
QQ：7-4-5-3-5-6-9-3-3
服务热线：I376I679487
7*24小时技术支持
更多请访问BOSSCHUCK官方网站
