E26，E26/50×39，E26/51×39或E26d灯头通规--7006-27D-3
Go gauges for E26, E26/50x39, E26/51x39 & E26d caps
目的：
PURPOSE:
检验成品灯上的E26灯头的螺纹最大尺寸和最小值尺寸T1。
To check the maximum dimensions of the screw thread and dimension T1min of E26, E26/50x39, E26/51x39
or E26d caps on finished lamps.
检验：
TESTING:
当成品灯上的灯头完全旋入量规内时，灯头中心触点应与X面接触。当灯从量规中取出时，至少应旋入两整圈才能脱离螺纹。
When the cap on a finished lamp has been screwed into the gauge as far as it will go, the central contact
shall touch surface X. When the lamp is removed from the gauge, at least two full turns shall be required to disengage the threads.
E26，E26/50×39，E26/51×39或E26d灯头止规--7006-29L-4
“NOT GO” GAUGE FOR E26/E26d CAPS
目的：
PURPOSE:
检验成品灯上E26，E26/50X39，E26/51X39或E26d灯头最小螺纹外径（尺寸d）。
To check the minimum outside (major) diameter of the screw thread, dimension d, of E26, E26/50x39, E26/51x39 or E26d caps on finished lamps.
检验：
TESTING:
当量规套装成品灯（灯头向上）的灯头螺纹上时，灯头中心触点不凸出X面。
检验仅利用量规的自身质量进行。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X.
Only the weight of the gauge itself shall be used in the test.
GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 Page 1/1 & E26d (NON-SKIRTED)
目的：
PURPOSE:
检验灯在E26灯座中有关接触性能的尺寸。
To check lamp dimensions for contact-making in E26, E26/50x39, E26/51x39 or E26d lampholders.
检测：
TESTING:
如果灯插入量规时，W面可与V面共面或凸出V面，则可认为灯的形状与灯座的配合是合格的。
The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge until plane W reaches plane V or projects beyond it.
对于E26/E24灯头的灯，当V面与W面共面时，灯头端部（包括焊锡或导电材料）应不超过X面。
For E26/E24 capped lamps, when surfaces V and W are coincident, the top of the cap including any solder or conductive material, shall not extend above surface X.
适用于E26螺口灯头的球泡光源的质量检测。产品完全符合标准IEC60061-3|GB/T1483，100%通过计量检定。
广东安规检测有限公司是专业安规仪器生产公司，富有行业经验的专业团队，精选优质材料生产，质量保证。
