E27灯头通规 7006-27B-1
Go gauges for E27 caps on finished Lamps
目的：
PURPOSE:
检验GB/T1406.1-7004-21中成品灯上灯头螺纹最大尺寸和尺寸T1min。
To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps shown on sheet 7004-2.
检验：
TESTING:
当成品灯上的灯头完全旋入量规内时，灯头中心触点应与X面共面或者凸出X面。
When the cap on a finished lamp has been screwed into the gauges as far as it will go, the centre contact shall be co-planar with, or project beyond surface X.
E27灯头止规 7006-28A-1
NOT GO gauge for E27 on finished lamps 7006-28A-1
目的：
Purpose:
检验GB/T1406.1-7004-21成品灯上E27灯头螺纹最小外径（尺寸d）。
To check the minum outside (major) diameter of the screw thread, dimension "d" of E27 caps on finished lamps shown on sheet 7004-21.
检验：
Testing:
当量规套在成品（灯头向上）的灯头螺纹上时，灯头中心触点不应凸出X面。
检验仅利用量规的自身质量进行。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface "X".
Only the weight of the gauge iteself shall be used in the test.
E27灯头接触性能量规 7006-50-1
Gauge for Finished Lamps Fitted with E27 Caps for Testig Contact Making 7006-50-1
目的：
PURPOSE:
检验灯在有关灯座中接触性能的尺寸。
To check lamp dimensions for contact making in IEC holders.
检验：
TESTING:
如果灯插入量规时，W面可与V面共面或凸出V面，则可认为灯的形状与灯座的配合是合格的。
The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge till plane W reaches plane V or projects beyond it.
E27灯头焊锡高度规又名E27灯头尺寸S1通规
Go Gauge for Dimension S1 of E27 Caps on Finished lamps
目的：
PURPOSE:
检验GB/T1406.1 7004-21成品灯E27灯头尺寸S1 max和S1 min.
To check the dimension S1 minmum and S1 maximum of E27 caps of finished lamps shown on sheet 7004-21.
检验：
TESTING:
当成品等的灯头完全插入量规时，柱塞的W面应与X面共面或凸出X面，但不应凸出Y面。
When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface W shall be co-planar with or project beyond surface Y.
E27灯头防意外接触规 7006-51-2
Gauge for caps on finished lamps for testing protection against accidental contact E27/51x39
目的：
PURPOSE:
检验成品灯上E27/51X39灯头防止意外接触性能。
To check protection against accidental contact of caps E27/51/39 on finished lamps.
检验：
TESTING:
如果灯头完全插入量规时，W面没有凸出V面，则可以认为灯的形状对于防意外接触性能是合格的。
The shape of the cap with regard to protection against accidental contact is assumed to be correct if, when the cap is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
E27灯头成品灯插入防意外接触规 7006-51A-2
Gauge for caps on finished lamps for testing protection against accidental contact during insertion for E27 7006-51A-2
目的：
PURPOSE:
检验成品灯上E27灯头在插入时防意外接触性能。
To check protection against accidental contact during insertion of caps E27 on finished lamps.
检验：
TESTING:
当灯完全插入量规内时，如果W面没有凸出V面，则可认为灯的形状对于防意外接触性能上合格的。
The shape of the lamp with regard to protection against accidental contact is assumed to be corret if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
广东安规检测有限公司生产的E27灯头量规一套包含E27灯头通规、E27灯头止规、E27灯头接触性能规、E27灯头焊锡高度规、E27灯头防意外接触规、E27灯头插入防意外接触规，适用于E27螺口灯头的球泡光源的质量检测，可成套购买，也可按需分开购买。
产品完全符合标准IEC60061-3|GB/T1483.1，100%通过计量检定。
专业安规公司，富有行业经验的专业团队
精选优质材料生产，质量保证。
